The Jalopy Journal
I ended up cutting the hole, it's now way easier to access, so glad I did it. I made up a flat 16g plate to screw back down over the hole when...
Thanks for the link... I'll pull the carpet up and see what will work from there. I also saw some rectangular access doors... that may give better...
Yeah, figured as much. there's only about 2" between the top of the master and the floor. The floor is flat, so thinking I may just cut the...
After a long winter break, I'm finally finishing up the '50 Shoebox. Sorted the 8BA Fathead out, and it's now running like a dream. Almost ready...
With huge thanks to FlatheadJohn47 in Texas, who had a spare internal breather tube! It needed to be cut down a little, but now all cleaned,...
Tommy, I checked it this morning and it’s 1 5/16” on both ends, and there’s a lip at the bottom of the hole that it seats against. bummer that...
Hey Desoto, Can you do me a favor and measure the dimensions on that breather if you get a chance. If it’s just basically a straight tube, if...
I found this… not sure if it’s a Ford diagram, but it does look like the vent tube from the crankcase goes to the outlet breather. That makes...
Separate names with a comma.
The Jalopy Journal
