19Eddy30's Recent Activity

19Eddy30 replied to the thread B&M blower.

9.5 static compression With 4 psi of boost full throttle =12.1 ish Compression ratio with 5 psi of boost full throttle = 13.5.1 ish...

19Eddy30 replied to the thread B&M blower.

No ,, The OD of pulley size. 6.79 OD really = 6.800 Bottom Top 3.8 OD = 3.800 & = 4-5 Psi of boost, Average , not set in...

19Eddy30 attached a file to the thread B&M blower.

@lake_harley [ATTACH] [ATTACH] [ATTACH]

19Eddy30 replied to the thread Introducing my Fuel Coupe-styled Tudor.

Try Your Luck @ The Duck!!! Open this Sat , & this Year Many Grudge Run's & bidding, 4:70s Quicker most time , No Thursday's this Year...

19Eddy30 replied to the thread Introducing my Fuel Coupe-styled Tudor.

Looks like Gary & other of Us plain ahead to prevent a mess & still happens :mad::mad:

19Eddy30 liked HOTRODPRIMER's post in the thread Technical Need help identifying this car. Anyone?.

C9, was a walking talking encyclopedia, he said there were 2 built. The first picture was Sam Bergman's 1931 prototype 3 window coupe...

19Eddy30 replied to the thread B&M blower.

@lake_harley Sounds like 90638 = 5 ish psi on 305 Pulley size 3.800 top These are Just rough estimates, I have ran the 144s on 2.3...

19Eddy30 attached a file to the thread B&M blower.

@lake_harley This was posted afew weeks ago from another thread The pulleys I have there are No part #s (B&M) 1995 ish [ATTACH]...

19Eddy30 replied to the thread Technical Large cam degree Wheel.

I have a few 9 & 12 , looking for 20 -22 Maybe , Big Diesel or Aviation . Good ideal on Printing degs on vinyl or sticker @Joe H...

19Eddy30 liked ekimneirbo's post in the thread Technical Large cam degree Wheel.

I have seen them in the past but don't remember where. If you can't find one, here is a picture of a Moroso thats pretty...

19Eddy30 liked Joe H's post in the thread Technical Large cam degree Wheel.

I made a 30" wheel out of plywood, then went to one of the local print stores and had them print off a generic degree wheel at 30"...

19Eddy30 posted a new thread.

Technical Large cam degree Wheel

Looked on line , @ one time I thought I seen like a 20 -24 inch made out of Aluminum , resembled a 4 spoke steering wheel , Anyone know of ?

Forum: The Hokey Ass Message Board

19Eddy30 replied to the thread Technical Need help identifying this car. Anyone?.

A Truck Doors ? Short like Roaster one's

19Eddy30 liked Ryan's post in the thread Coker Tire, The Alliance, & More....

That’s a weird line to focus on. I should have said “traditional HOT ROD tires guys,” but I thought that was implied given where we are....

19Eddy30 liked Corn Fed's post in the thread Hot Rods 1932 Ford Coupe Dragster..

Yep, they hurt themselves by doing the silent auction thing. It's just like when I'm at a swap meet and someone asks me what I'll pay...