The Jalopy Journal
Filler is porous. If moisture gets in (or is trapped in after wet sanding) bare metal under it WILL rust. Put Filler over epoxy primer and it...
take a picture from under the dash looking up to see what, if anything its attached to.
Salvage any useable parts to help other cars live on
Can't tell from this side. Sometimes a plug weld will just fill the hole in if it does not penetrate to the other panel.
The wishbone ball joint in a model A is already behind the pitman arm. Making it longer may increase bump and roll steer. Worth jacking up each...
What front wishbone configuration are you running?
Remember it shrinks, and keeps on shrinking. The thicker it is the more it changes shape. So if it's a critical, and very visible body line, keep...
If its not got a filter, every 1000 miles. If it's got a filter I change every 5000 or 2 years. Now modern gas is mostly sulphur free You don't...
Same block as the 1930 Cord maybe.
You didn't say if you were running any kind of filter. Detergent oils need a filter to remove soot. Non detergent oils led it settle as sludge in...
PVA glue. Just dab the ends stops fraying and dries invisible.
It's a press fit. You will need to make some tools to do the job.
Not true. On full lock it rotates about the king pin which is at an angle. You need to check clearance lock to locks
British would be degrees C
Good expiation of the importance of polarity
Separate names with a comma.
The Jalopy Journal