The Jalopy Journal
That is awesome Ron congratulations!
So I have tested the car with the analog meter and the voltage is not swinging. It allowed me to see that the voltage was way high hovering over...
Thanks for all the suggestions guys, I found an analog tester I can borrow to try. The car has a magneto so I can run it with pretty much...
Hey guys I’m kind of stuck on what’s going on with my charging system. I was driving one day and shut it off and when I went to restart it...
Also in that picture I posted those are the original style springs I used to brake the cam in, The ones I’m running have thicker wire and a flat...
My guides are cut down 1/2” in height and also cut for umbrella seals. I don’t know for sure, but think they are a “z28” style spring, 1.26 OD
Anyone have a vintage clevite catalog that they could look up the specs on this bearing? Thanks, Joe [ATTACH]
I wanted to add a little info here to maybe help someone in the future. I bought a Schneider cam and valve springs part number 6710. To get the...
I did get the car driving right before cold weather hit. Unfortunately it was problem after problem with the engine and transmission. It’s a long...
A 39 Convertible is my favorite early Ford by far, look forward to see this come together!
Just an update to this, I changed out the 1” to the 1 1/16” slave and it is a night and day difference. I could barely get the clutch pedal to...
Separate names with a comma.
The Jalopy Journal