The Jalopy Journal
Hi All, I have a quick question, I'm looking for a 63-66 C-10 or C-20 truck (like I need more potential car problems) to just mess around in...
Hi All, It's been a while but I thought I should share something that is making me wonder a bit. I have a chance to buy the place I'm living in...
Hi all, Quick question. I suspect I have a bad turn signal switch on my 53 Chevy. With the ignition off if I press on the brake pedal and hold...
I'm grateful so many HAMBer's have given me a lot of valuable advice so hopefully one last thread is OK for today. With my 53 Chevy, I have a 3-5...
Hi All, I have a SBC 350 motor in a 53 Chevy. The fan is a mechanical one on the pulley. I know I should eventually look into an electric fan,...
Hi All, I'm guilty of neglecting my 53' Chevy (from a driving standpoint) with a SBC 350 and Edelbrock carb. It drove in late July to the garage...
Hi all, I installed a disc brake kit on my 53 Chevy. The driver side caliper was tougher to get on than the passenger side even with brake lube...
Hi All, I have steel rims and am tired of seeing them red and with paint chipped/scratched off. I don't have a matching pair of steel rims so...
Hi all, I have a 53 Chevy with a new Dorman master cylinder that fits a 68-72 mustang. I didn't bench bleed it before installing but I went...
Hi All, I have a 57 Chevy rear end in my 53' Chevy. I'm doing some debugging with brakes and already have it on jacks so I was going to take a...
Hi All, I have a 53 Chevy with a SBC 350 (1973 Chevelle motor) and I had taken the driver side head out and had a valve fixed earlier in the...
Separate names with a comma.
The Jalopy Journal