The Jalopy Journal
So what do you do for steering arms?
One brake line too close to exhaust heating brake fluid causing it to expand, applying one side faster than the other?
Used the trans cross member out of 68-74 nova. Worked great.
Right on . I'll try auto zone and see what they come up with. If I can get the right sender I'll separate the power feeds to each gauge and see...
Thanks porknbeaner. RMR&C tells me the temp ga. does start from the hot side. So I'm good there. As far as the oil pres. sender, haven't found a...
Fired it up to move it and the fuel ga. started working. Seems some what accurate. He's gonna drive it for a while and see what happens. He still...
Thanks Flat Ernie. Got a clearer picture of what's going on.
So getting a resistance reading says the sender isn't open, yet the gauge doesn't respond. How do ks senders operate? There has to be some sort of...
Thanks for the replies fellas. The reasoning behind replacing the senders was to have new parts in place, he's working towards daily driver...
Thanks GreenMonster48. Yes, the straps from ga. to ga. are there. Using the cvr, it's wired just as ford did it in later years. It should work....
I thought about that but all the info I found says it doesn't matter. The needle is at the high side even at rest (key off).
I've spent several hours searching, found tons of info but nothing specific to my issue. working on a 50 f1, 302/c4. Installed an ir1 regulator...
http://blog.golakehavasu.com/theres-something-in-the-air-for-drag-racers/
http://blog.golakehavasu.com/lifes-a-drag-takes-on-new-meaning/
Separate names with a comma.
The Jalopy Journal