The Jalopy Journal
what is your wheel cylinder and master cylinder bores? had one that bled good, good pedal but rear brakes didn't work right, the wheel cylinders...
Looks like E7TE on that casting, which would be 1987 on the year, most likely a 302. Run a tape measure across the intake, center to center of...
The port to the front of the car is actually the rear brakes, the one closest to the firewall is for the front brakes. Usually on those master...
I have an extra '47 Chevy frame from a coupe I cut up for parts if you need it, I'm in Conroe.
Just got back from taking a load out there, it seems to be filling up a bit, though I'm sure some will stay away because of the weather. I've got...
Find a Tractor Supply Company store, I bought one there a few years ago for a 53 Ford truck I had.
Looks like a pair of the old "towering inferno" 4 barrels used on mid fifties Fords, got the nickname because of their tendency to catch fire, not...
usually will just cut out the flap and then weld up the holes so there is no exhaust leak and put it back in place.
The doors are either 28 or 29 with the wide belt line, I am not sure on what length doors were for which body style.
1937
Happy B-Day Danny!
Just did one a couple months ago, used the original style lacing on the cowl, some of that stick on foam rubber street rod hood lacing on the...
Sent you a PM, couple of really good old stripers in the area
Enviroclean, in Spring off of Spring Cypress, they do media blasting.
If you're using the stock front mounts and a rear trans mount you need the middle mounts, otherwise you risk the bellhousing breaking with no...
Separate names with a comma.
The Jalopy Journal