The Jalopy Journal
I replaced the ball joints just prior to doing the steering box. I did not get good quality ones, so it's entirely possible that could have...
I did not know that. Thanks alchemy
Sounds like my next step is to take it back out and double check everything. Not a fun job. I'll need to start stocking up on new cuss words. Cuz...
The adjustment screw seems to be set correctly. If I loosen it up any the steering wheel has way to much play. There weren't any gaskets to set...
Now for my next problem child. I rebuilt the manual [ATTACH] steering box in my 57 fairlane. I did so because the bearings were worn out, and it...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Welcome to my world. I've been driving the same 1960 "orphan" ford for the last 14 years. In that time it's...
The fact that the Mercedes fits at all is surprising. But that does look like it would solve my issue. I'll contact Spec and see what they have to...
A larger diameter clutch would be ideal, but I'm pretty sure I'm limited to the 8.5 inch set up. So I think my my next option is to find a...
Thanks junkyardjeff. I didn't think of that. I'll do some research
I also thought it might be an engagement issue, but it would have to be an issue prior to the clutch itself. I say that because the present clutch...
I built a 200+hp 200 6 for my 64 falcon that has clutch issues. I put a t10 behind the 200, but the engine appears to be too much for the stock...
Separate names with a comma.
The Jalopy Journal