The Jalopy Journal
Still working on it. The motor and front end are installed. I have been replacing all of the floor pans from the firewall to the rear bumper. The...
You have to produce a 56 1/2" kit. If you can figure out a 22 1/2" inside frame rail to 29 1/2" outside, I would be interested.
Got a little behind... Thought I would attach a couple of pics. Anyway, the wiring issue is resolved, thanks to papastoyss and Conrad_AZ. Anyone...
New transmissions do not have the old speedo cable, so that won't work. The oil pressure gauge is not a problem. I am pretty sure that old amp...
Thanks to Conrad_AZ and papastoyss...you guys really do get it. As far as the transmission, the motor came with the stock 5 speed auto and I plan...
And, to think that I was looking at a '55 Pontiac prior to getting this...I could be puting an LS7 into that.
Thanks everyone. I never thought that this was going to be easy. If it was, I would just do another Chevy shoebox. I have owned all three at one...
Thanks Hnstray, they also have just the new a-arms...soooo many choices. That's why I asked the question. I was hoping to find someone else that...
You have confirmed what I thought, Fatman Fab is the way to go as it does use a GM front steer out of a Cavalier. One of the Alliance Vendors has...
I am getting the factory harness with the engine and tranny and thought I would stay with the EFI. I realize that I can't use the stock...
Well thanks everyone. I did actually do a lot of research prior to buying the motor. There are so many different ideas out there, I thought...
I bought a 5.7L Hemi out of a 2007 Dodge 4X4 and am starting to look at the installation. So many questions. What IFS or do I just keep the stock?...
Separate names with a comma.
The Jalopy Journal