The Jalopy Journal
In reference to the picture in post 8, assuming the drag link is attached to the steering arm, does the angle of the pitman arm look correct ?
I recently had the same problem and someone on here suggested using a banjo fitting. The banjo fitting worked well and made a much nearer solution.
If you have Facebook check out their group 'SDRA Tulsa'. It is a public group and several of the members will be happy to talk to you.
I will be 78 in January. My dad owned an auto parts store and machine shop. During grade school I started in the shop during school vacations. I...
In the for what it's worth department, I wired up this setup on the bench today. There must be some funky wiring in the latching relay because...
Except for the dual function horn ring, this is the set up I will be using in my 28 RPU; however, on the latching relay power to terminal 30 will...
Early summer of 1960, I traded a Chevy dual quad setup for my first T roadster body which was mounted on a Model A roller frame. The duals were...
Helped a buddy install one of these in his new 60 Chevy. Wouldn't work until we realized we were working with a plastic dash, needed a ground....
Back in the late 40's, early 50's my family lived in a small rural village just off the highway. A neighbor had a flathead powered model A....
Several faces shields, safety glasses, and a Apple wrist watch and an Echo Dot for use as intercoms, "Come get me! I did it again."
Separate names with a comma.
The Jalopy Journal