The Jalopy Journal
A quote from my grandfather. "From the neck down is a dollar a day. From the neck up is unlimited." Found this to be accurate.
FYI SPEEDS FOR DRILLING A. Speed refers to the revolutions per minutes of the drill press spindle. For efficiency in specific drilling...
Only your DMV can answer your question.
Don't forget your local library. What they don't have they can usually get from another library.
Is it possible the elongated opening in the stand is to allow for movement of the pump arm? The pump should not need an elongated hole.
Which wheel had no fluid in the wheel cylinder? If one of the rear, did any fluid leak out of the line when the cylinder was removed? If not,...
Back in the late 60s I installed a kit in my car that used engine vacuum to pull hot or cold drinks into a plastic cup inserted into the...
Donuts You never told us what you are wanting to weld. Body sheet metal only or thicker stuff like suspension and frame components? A 110 volt...
Don't forget the 351W for more power than the 289 or 302. Also the 300 six may be an option.
Correct dwell will be obtained by properly setting the point gap to specifications.
Tfeverfred, The Ford name is Chestnut.
Have a 62 Fairlane with a very similar color. Always called it Turkey S$%t brown.
302 and 351W should both use the same engine mounts.
If you need the power and have the $$$ go with the C. If you just want a streetable reliable ride go with the W.
Also verify the rod from the brake pedal that contacts the master cylinder piston has some clearance when you let off on the pedal. If the MC...
Separate names with a comma.