The Jalopy Journal
Have you tried contacting Holman and Moody and just ask the dimensions of the wheels? They are still in operation and will probably have...
Can you get the rear wheels up and verify the noise is from the rearend? If so I would be looking at the bearing retaining caps to see if they...
Couple of ideas here but it depends on what you got. You say the valve only opens about an 1/8" which would seem to be the cam, lifter or pushrod...
Not going to say the best but the results were great on my ride. I like the Huntington Beach products. I like to polish it out, then do the Nano...
Jenkins stuff - early 70's is about when it showed up. Something similar that the stocker guys did was run PCV units in both covers, tied together...
You want a stacked type cooler not the fin and tube type. Cools a lot better and you can use a smaller size cooler for the same cooling ability....
Oh geez...chemical stripped a bunch of cars, never had any problem with paint lifting either. First I run a da over the whole thing with about a...
If it was cleaned well before painting, Rustoleum is a great engine paint. I have used it on the inside of the engine to seal the block and...
Inline is fine if it has two sets of mounting holes, if not then you have to use the offset or staggered mounting with the 168 tooth flywheel....
Damn and I have three of them in my tool box just wastin' space! <object style="position:absolute;z-index:1000" type="application/x-dgnria"...
Here's a site that I have used before for information on my '55 210. http://chevy.oldcarmanualproject.com/chevyresto/55index.htm <object...
You're not going to like that Speedway one for that if I am looking at the right one called a Park-lok? Jegs sells the regular line-lock in their...
Just me but i would prefer to come directly off the battery with 8 gauge wire to the panel. Might want to put a fuse link in it too. <object...
What's your intention for the roll control - burnouts or a temporary parking brake? <object style="position:absolute;z-index:1000"...
I am not going to say "sorry" or anything like that but I can tell you as a dad with an older son involved in the hobby that you made him very,...
Separate names with a comma.
The Jalopy Journal