The Jalopy Journal
Town Hall in Ligonier Pa …[ATTACH]
If you look close you’ll see the MT covers [ATTACH]
[ATTACH] How about 1/2 black and 1/2 white
This one is right on the main drag before Carlisle fairgrounds. Would be cool to see pics of this in its heyday next to the turnpike
yeah it may be ugly but the electronics haven’t let me down yet like the coils and points have
Thats exactly what I did … took it out last week to a show with no issues
Thanks for the link, very helpful! I reinstalled the driveshaft with the retainer ring and test fit the distributor. I’m running the HEI Chevy...
my brains broke too. Haha .. with the pan off I’m going to drop that shaft into the pump with the clip off like it was and put the distributor...
Each bolt was still tight
I’m gonna check pump now that the pan is off. I had oil pressure as I left the house which makes me believe without that clip on the shaft it was...
no pics but I can grab some. one side has a slight chamber and the other side had more of a point. Seems there was a small notch in one side of...
I shut it down when i seen no oil pressure and tore it down today. Turning it with a drill before I started tearing it down it still showed 50-60...
The drive measured 7.450 I seen that’s what the stock length was. Before I dropped the pan I slid a straw over the drive that fit pretty tight...
Thanks for the info! I’ll check each one and any the tops and see if everything is consistent with this first one. I didn’t know if I could pull...
Hey guys..was running the ‘64 Comet with a 289 to a show yesterday and hit a stretch of road with some serious woop de doo’s in it and looked down...
Separate names with a comma.
The Jalopy Journal