The Jalopy Journal
BUMP
The Eppster is on the road! [MEDIA]
Now doors and out in the sun. [ATTACH] [ATTACH]
the Eppster has new paint. [ATTACH] [ATTACH] [ATTACH]
I just got back from a visit to Epp. He has most of the body work done, just primer, sanding and paint. Then back on the chassis for wiring and...
The mechanical advance in the distrlibutor may be gummed up and sticking at full advance. I have seen this several times. This will cause a kick...
Thanks HOOP 98, Great info.
You can certainly use racing oil. The only problem is finding racing oil that is in the 10-30, 10-40 or even 5-30 weights. It is made though.
If I remember correctly on the early 283 blocks, you need to use the starter that has a short outer bolt and long inside bolt. They should be...
You said you have a Holley carb on the 283. What manifold are you using? If you are using an iron Chevy part are you using and adapter? Some HP...
OK guys, I know we hate to do this until after we have a problem, but. read the f--king instructions. Now, please pass the dam bottle . It's...
Jack, I agree that hooking the wire to the neg post on the coil shouldn't be a problem. I am trying to suggest another way to ground the overdrive...
The wire from the solenoid to the coil is using the points as a momentary ground just as the coil is. The solenoid would get to hot if it used a...
It's been a while since I updated this thread. The sheet metal work is now done on the body. The frame is finished and the engine and trans have...
Last August I was on a little cruise in Northwest Iowa and I met one of those Google Street View vans. I remembered seeing the van and where it...
Separate names with a comma.