The Jalopy Journal
Looks like a previous owner cut the bottom out of the float bowl and added that plate with the 4 bolts- wonder what that was about? There should...
Those look to be adapters to go from one size Winfield square base to another Winfield square base. Notice how the carb flanges are a different...
On the Gemsa, fill the chamber with a piston dome with the valve side of the dome slanted so that you can develop some squish and they run pretty...
Info on the fuel pump please! How much pressure does it supply?
That's the wrench you use to loosen the set screw to adjust the position of the chuck stop that locates the stem end of the valve in the chuck....
Is the plan to access the battery thru an opening cut in the seat pan on the passenger side or ??
And if you use a B pan, you will need to make up a filler piece or splice in a chunk of A pan to seal around the rear main cap, as the B cap seal...
Any reason not to put a Model A ring and pinion in it with Model A center section and axles? Just asking...
"I read somewhere that there were single stick conversions, with varying abbreviations like OR and OSR or something of the likes. Does anyone know...
This style works pretty well. Not too expensive:...
Probably a regular valve spring compressor. Collapse the spring and remove the split keys that hold the lower spring retainer onto the valve...
dm sent
April Fools!!
Charlie Yap has some side covers available.
"and yeah the give away that the radiator hoses are on the intake side is that they are attached to carburetors lmao." Hope - those hoses are...
Separate names with a comma.
The Jalopy Journal