The Jalopy Journal
If you're in Spartanburg any time soon, a couple of posters dropped off at TM Race Cars would be MUCH appreciated. We will be at SIM, but I really...
Gonna add a story from good old N.C. A friend of mine bought a "63 Chevy II from S.C. , clear S.C. title that matched the V.I.N. on the door...
I got a little off here. I just reread, and saw that you wanted to use a buggy style leaf spring. Not much experience here, but I don't think...
This is more for mostly drag cars that see very little or no street time. I think the OP was talking about a street only car. Perfect front mount...
Also if leaf springs are used, the housing needs to float at the spring . The rear of the ladder bars still need to be mounted as described above.
If you're using a standard ladder bar you can leave the rear, top left bolt, out of the mount on the housing. The other rear mounts should have a...
Yes !!!
Here ya go http://towelcityracingtires.com/Pie_Crust_Cheater_Slicks.html
The gasser race that these guys put on has to be the best show in drag racing!!! If any of you HAMBer's are in driving distance and miss this you...
This method requires "some" disassembly. Remove a push rod and measure. Roller cam pushrod is 7.200" (7 1/4") long . Flat tappet is 7.800" (about...
Separate names with a comma.
The Jalopy Journal