The Jalopy Journal
It isn't all that recent, but the fundementals still apply, and I like Corky Bell's Maximum Boost The biggest challenge is sizing the turbo(s)...
If you live in a metropolitan area, I've had pretty good luck searching Facebook or Craigslist services for 'waterjet' or 'laser cutting'. The...
49 GMC - OT Everything [IMG] [IMG] [IMG] [IMG]
A set of long-tube headers for an OT engine. Used lumber to get the correct orientation of the flange to the collector and started cutting tubes...
Confuser? You're making this too complicated. Unless you are going to do several sets of headers a tool is unnecessary IMO Squeeze the primary...
I put a 'remote' Hydroboost on the frame rail of the truck in my avatar. The unit itself was sourced from a junkyard Astrovan. I've paid between...
Another option is to take a -6 AN (or JIS) union, cut one of the nipples off and drill to 3/8". Silver solder the tube into the fitting. The...
[ATTACH] [ATTACH] [ATTACH] hh[ATTACH][ATTACH] [ATTACH] Harbor Freight winch, spider coupler with a nut welded on to it, Amazon 12V power supply,...
We were there late June, and you're right, the road is a little rough in places. Same thing on the I-40, but didn't have to dodge semis at 80mph!...
I highly recommend getting off the I40 out of Albuquerque as soon as possible and dropping down through Malpais and into Quemado as Teach'm...
[IMG] Piece of polished stainless exhaust tubing bought from Speedway, horn slip ring/upper bearing from mid 50s Chevy car (Chevs of the 40's -...
I learned to gas weld in high school. In my 30s I was building an aircraft fuselage out of chrome-moly using gas. A neighbor offered the use of...
Separate names with a comma.
The Jalopy Journal