The Jalopy Journal
Nicely done, going to share any more details?
Jeff you're a fountain of knowledge, you ever ever visit the sf bay area?
Thanks for the shots and the feedback Jeff. They did say the center link is dual tapered, so I can reverse them to deal with the pan. Still going...
Looks great...Please post detailed install from the intake/injection if possible, I'm going to order one of those for my 50 Ford Tudor along with...
I can climb under and measure...do you have a way to calculate a way to relocate them?
Zefa, if you look at the 2nd pic, the trans bellhousing was clearanced for the steering. Are you saying your engine is 2" further forward than...
The same guy who did this put the orange filter on. But thanks for your super useful feedback. Hamb strikes again.
I could probably modify it, from what I recall looking into them. If it were my install, I would have taken a drift and hammer in the beginning...
The biggest issue for me is the center link/ trans clearance. The bottom of the bellhousing was cut out to clear it. It probably needs to be back...
Here's the hotrod article showing the Volvo box and the Fatman steering linkage:...
Which is why I made this post, asking if anyone HAD EXPERIENCE with this combination and what was required to make it work. Again, this wasn't my...
Shoebox central lists the steering link as working with a sbf. Lots of people have done the swap, no one has mentioned these problems as far as...
Here are the photos. Looking closer, there is a rubber bit below the mount bracket, so they may be installed as intended. There's basically no...
Separate names with a comma.
The Jalopy Journal
