The Jalopy Journal
Thanks for the response. The truck I'm working on is a 54 Chevy 1300 with stock steering. I had the steering box apart to replace the bottom...
What is the assembly method to insure the steering box gears are centered so you have equal turning radius to the left and right. I assembled...
OK, I'm back on this and I counted the teeth on the flywheel by marking every 5th tooth and the total teeth I have is 172. From my research this...
Thanks everyone for the good advice. I plan to try to count the flywheel teeth w/o removing it to verify I have the correct year flywheel. If I...
Thanks, pulling the flywheel is what I'm trying to avoid. I will look at the wear via the starter window. I read elsewhere that the 55 flywheel...
I have a 54 chevy 3100 with the stock 235 in line six. I just put the motor back together and I'm having trouble getting the starter to engage. It...
Wow! that is a whole bunch of information for me to chew on. Now I'm more confused than I was before sending this in. I appreciate all the...
Hi, I'm doing a resto on a 54 chevy 5 window truck and looking for some help with the pinion angle. I have a T-5 S10 tranny going behind the 235...
Separate names with a comma.
The Jalopy Journal