The Jalopy Journal
Thank you for the input. I am going to take your suggestion and rework my steering linkage before I do anything else. Who knows, I may find I...
Thanks for the photo. helpful
Thanks Sent from my XT1585 using The H.A.M.B. mobile app
Because it has a 4 inch drop axle Sent from my XT1585 using The H.A.M.B. mobile app
My steering arms are just 3/4 inches above my front wishbone - think these would cause tie rod to hit the wishbone. Thanks though for the idea....
I am installing a freshly rebuilt 1949 ford flathead v8 in a 1941 ford frame. Engine oil pan (center sump) I'd directly over steering rods...
I had not really planned on changing from using my original 1041 Ford U bolts. They cleaned up fine and the threads are good. That was...
great solution. Thanks.
Thanks, I did notice that the top leaf (both front and rear spring) had a chamfer edge in it. What was the reason for doing that? To avoid...
Thanks for the input. Much appreciated. Any other thoughts are also appreciated.
In an effort to lower the '41 frame I am working on, I have replaced the front and rear cross members removing the drop in the stock cross member,...
Thanks a bunch for all the good input. I appreciate it. Sorry for the delay on getting back - my old '41 pitman arm is 6" from center hole to...
Have you seen something like this made for the Mustang manual steering box? I have not had luck yet finding one . .
Separate names with a comma.
The Jalopy Journal