The Jalopy Journal
Winters makes quick change rears for many racing classes. But if you look at the hot rod category they list the steel tube and bell V-8 rears for...
As to piston selection, by your description it appears that it got to 406 by the +0.030" over bore and kept the stock rod length. So when looking...
I think you need to approach the purchase as you are at best buying a core and it may / may not be usable. They are expensive to build so don't...
Not much info on what you want to do with what type of car, but if you have enough HP to be concerned about hooking a drag radial, why not get a...
I have a triangulated 4 link with transverse spring setup. The spring is a '40 Ford front spring mounted behind the rear axle. Challenge is to...
If in fact the pistons are 12.5:1 they may/ may not have the standard 350 wrist pin height (compression height). I guess i would start by...
If you prefer steel, get a steel torsion bar arm and modify to suit. Come in straight and offset.
Mercury marine cast pan showing internal cast baffles and conventional windage tray. [ATTACH]
Perhaps the term shallower was misleading. The Mercury marine pans take a standard depth pump. The sump is elongated and relative to the front...
Since it's rich at idle, have you checked the carbs while running to make sure that you don't have fuel entering for sources other than idle jet?...
If you want to be able to read a bank at a time, and if you don't mind some fab work, it wouldn't be that complicated to make a slip on log style...
There are several different styles of clamp on attachments to hold an AFR sensor.
I belive your correct that Cal Custom, and perhaps Elco made cast aluminum oil pans. You didn't mention what chassis. I have a collection of cast...
Yes, a shop seems never big enough regardless of size. My original shop was 24'x32' and despite being well organized and most tooling on wheels I...
A suitable cheap sheet pan lined with oil absorbent pads works well and doesn't make a mess. I have two under the bed of my lathe. Easy to switch...
Separate names with a comma.
The Jalopy Journal