The Jalopy Journal
The lamp wire needs a #57 lamp in the circuit or a diode . That terminal will back feed . You should NEVER operate an alternator open circuit !!...
try D24-P15.com
You didn't say witch 318 [pre 1965] you are working on . I do know if you have an early 318 and installed a late late cam a lot of things get bent .
I think your math needs looked at .
I believe the 500 is good to 1/2 " the 750 is 3/4" I have I believe it is 750 . I could never get the hang of hand sharpening . I think DD does a...
On a right hand rotation [opposite automotive ] pistons are mounted notch toward the flywheel end , rods mount in their normal manner .
Is retaining ring properly supported when it is being pressed on or are you just using two support blocks on two edges ? Been there done that !!
Looks like a ford truck wheel about 1952 . Depress the horn button with the palm of your hand and rotate to the left .
A little more info would help .Like what is in the way , I would think the transmission tunnel is large enough it had that big GM hydro in it . So...
X2
Hello, everyone talks about slowing the machine down , the best thing I did was disassemble the clutch and clean it and wipe the clutches with...
the most probable cause is the reverse band strut is broken . The unit does not have to be removed to repair it can be installed from the bottom ....
Most certainly will . Had 54 ford f250 had sat for many years , my son pulled the tank rinsed it our in the mean time I did a valve job on it ....
x2 . if it still bites back , remove the coil wire if that helps try retarding the timing a little . [ rotate the distributor in the rotation of...
taste it
Separate names with a comma.
The Jalopy Journal