The Jalopy Journal
Tig is cleaner, safer and a better quality weld. Splatter welders (Mig, Stick) scatter hot metal debris and start anything flammable in a 10 ft...
Wrong size tool, retainer should not be down in the recess. You need one for the smaller o.d. retainer to sit on the tool where the micrometer is...
Brakleen is Acetone, Oreilly's 9.49 for 24 ounces. Home Depot Klean Strip Acetone 21.96 for 1 Gal. or 5.333 cans of Brakleen.
Looks like you tried everything but swapping the manifolds side to side . Kenny
Pfffft, just another highboy crop sprayer. Should pass tech he pulled the 20ft spray booms.
www.hobby-machinest.com/forums/ Good site with good info for the new want -to- learn and expert machinest. Many how to subjects with Q&A.
Battery power tools are my choice over air for a few reasons, they're quieter, way more torque, no cord or hose to deal with, cleaner to use (no...
All the cylinders fire in two crankshaft revolutions . The "dead" plugs are used to discharge the transformer (coil) every time it's energized....
Oxy/Propane works just as well as Oxy/Acetylene . Price for a torch set up for propane will be about the same, only difference in cost is...
I don't think so, the 3/8" hex is standard for fuel pump drives Hilborn,Enderle, Waterman etc. You might be able to chuck it in a lathe and cut...
The first picture looks like the shaft was pressed in, welded and the weld was machined flush with the gear. Look at the difference in color ,...
uncommonengineering.com has some flathead eyecandy including full race Hudson engines.
[ATTACH] Friend in mn sent this:
3M SJ 3000 hook and loop (velcro) tape, 1/2 inch wide, comes in a roll. Cut to length, temporary or long term installation. I use it to bundle the...
Separate names with a comma.
The Jalopy Journal