The Jalopy Journal
Time to drag this one to the top with these photos and a request for anyone that recalls the car? Ran in Wyoming and Montana in the late 60's
[ATTACH] [ATTACH] [ATTACH] Anyone know anything about this?
No one know Hometown USA? Watched it several times a day as a toddler apparently! Sent from my SM-A300FU using The H.A.M.B. mobile app
Found these in a friend's lockup. Not got a motor to put them on, so they're going up on my wall!
Bit of an update on the Delivery... Got the bulkhead made and nearly finished welding it in, I was gonna do a bit of bead rolling in it but Ive...
Thanks for the nice comments chaps! KiwiJeff, the 4 bar rear set-up came fitted to the chassis so gave me a quick way to get it rolling, with a...
Thanks for the comments guys! I appreciate it! Thanks, but Im not sure what you mean by a tongue and lap method? Maybe we call it something...
Next was to start finishing the axle off, ready to measure up for new halfshafts [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] And the last few...
Making a steering column came next, I used thin-wall Stainless tube and a tapered piece welded to the end for the surround and 1" OD x 1/8" wall...
With the roof out and the old wooden subframe out, I started on making the new frame... [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] As with any box...
Thanks! If the rad waves about too much then Ill think about it ;)
Next I sat the mock up engine and box in (307 SBC & Powerglide) [IMG] After buying a Vega Steering box I made up a drag link to connect the box...
First task was to make a straight axle for the front, so I bought a length of 2" O.D. x 1/4" wall CDS tube and set to machining the ends for the...
Greetings from England! I'm about 8 months into building the car and thought this would be a good place to make a build-up thread of what I've...
Separate names with a comma.