The Jalopy Journal
SWEET! Thanks. Will have to age the chrome a bit.
65 Imp- Hey, thanks a lot for the pics. We like that setup, and think that is the route we are gonna head. Our linkage is a bit different, but...
These 4224 Holleys are mounted on an Edelbrock TR-1 intake on a 55 Chevy Gasser what we are trying to do is rig up return springs similar to what...
Well I went and got a lever switch pt# SLS 43 Standard Products. Tested it and both terminals were hot. It has to be mounted with the lever...
Ok Thanks that gave me some ideas. I really don't want to cut and get involved w/ flaring lines. We had to use a Wilwood remote system and two...
I had to eliminate the prssure switch in the system for a lot of reasons and now need some ideas. Does anyone know of a pressure type switch that...
I was looking at the same thing and after talking to Speedway Motors tech guys they pointed out that 2800 lbs was the limit for a rack and pinion....
Hi Guys haven't been on in a while we pulled the Willys apart and changed the steering box and I wish I would have read this before as I bought...
Hi Justin, The Ross box is the 41 willys factory box. I'm going to order the bearing type kingpins and replace the old ones. If anyone cares I'll...
Yea I thought of that. There just is not alot of room between your hand on the wheel and the door.
Thanks everyone. All the parts are free. The real problem is the turn ratio. If you go from stop to stop it's less than 2 turns of the steering...
Hi Guys, I have hard steering, the car has a tube straight axle w/ a stock Ross box and before I go through the work to go from traditional to a...
Separate names with a comma.
The Jalopy Journal