The Jalopy Journal
Perfect info there, just what I needed. Thanks [emoji108] Well on the way to mocking up the new bracket now [ATTACH] Sent from my iPhone...
No my images are off the carb bracket, your right the Trans end is all ok https://photos.app.goo.gl/ATiXjxVXjxv3isCG8 Sent from my iPhone using...
Well looking at the drawing and info you’ve all posted it looks like the person who made the bracket made it completely wrong Please let me know...
Managed to get good pressure today after the fluid and filter change If the TV cable was adjusted to achieve a gear change between 1 & 2 at...
No it wouldn’t move in any of the gears Sent from my iPhone using H.A.M.B.
When I say it was low on fluid I mean the coolant lines were weeping and the fluid level was just above the bottom hatched level I’m going to...
It’s drove fine for about an hour then lost drive in all gears I’ve found the fluid coolant lines were leaking so I’m hoping it was just low on...
Here’s a video of the TV and carb linkage https://photos.app.goo.gl/ATiXjxVXjxv3isCG8 Sent from my iPhone using H.A.M.B.
Ok thanks for all the info everyone, I will take some measurements tomorrow and see what I’ve got [emoji106] Sent from my iPhone using H.A.M.B.
Yes all hooked up, adjusted so the slide is all the way in on idle then it self adjusts when you press the gas peddle fully down What pressures...
I’ve got a 700r4 with a Lokar shifter & Chevy 261 that lossed drive after an hour run. If left for a period it would pull again then stop again...
That looks perfect, no idea why I didn’t find that when I checked Summit Thanks
I’ve sent them an email as I can’t see what I’m after on the website Thanks Sent from my iPhone using The H.A.M.B. mobile app
Maybe 1/2” apart Sent from my iPhone using The H.A.M.B. mobile app
Separate names with a comma.
The Jalopy Journal