The Jalopy Journal
A couple more electrical functions finished inside of the coupe cab. With the body turned upside down in the body rotisserie it made installing...
Finally got the dash electrical finished. It took me way longer than I had expected. I still need to get a Head light sticker for the switch...
Fuse panel is now bonded into the top of the firewall, along with my make shift clamping fixture. [ATTACH] As hard as I tried pulling on the fuse...
After mapping out every position under then dash for the fuse panel, I finally come to this location that allows for each harness to reach its...
Now the real fun begins. [ATTACH]
Finished up the trunk mounted battery box today. Got the battery cable disconnect installed, along with the vent tube. [ATTACH] View from...
After getting the fuel line assembled I desided to pressure test the section from the pump to the carb for leaks. (8 psi) I'm glad I did, two...
Not much done to the 33, for I've been on lite duty for the last month. The battery box in the trunk has been put on hold, so this gave me time to...
Thanks for the pics, beautiful cars & trucks
Finished one more task on the 33. The sealed battery box in the trunk area all mounted. [ATTACH] The previous owner do do this right and...
It's finally all one color even if just primer. [ATTACH] [ATTACH]
Its been awhile since my last update, so here goes. After getting the doors mounted and the door latches worked out, I finally got around to...
Engine is in the chassis and waiting on a fan belt and a 3/8" tube spacer to finish up the idler pully for the crank and water pump pullies....
Thanks, I have the top part of the hood. I don't have the sides, and will probably fab' up thoses a little further down the build.
With some modification the alternator bracket is mounted to the top of the motor. The outer mounting ear/tab had to be moved out to get the pully...
Separate names with a comma.
The Jalopy Journal