The Jalopy Journal
I built on of these in 2000-01 for a customer. Here is what a finish car looks like. http://www.hotrodheaven.com/tech/32chev/32chev1.htm Just...
Here is a link for your booster test. http://www.hotrodsusa.com/store/tech.html Click on brake booster test page
Check and see if you have 1/8 National Pipe thread and not 3/8 thread. the tighter you get them the tighter the seal. Use liquid teflon and make...
Portland International Raceway on Wednesday nights they been getting about a thousand cars. The Black 50 Chev PU and a 32 Yellow high boy should...
Thanks Guys, to bad it took 4 years for him to complete the truck. If this truck could have made beeen done 4 years ago. His air suspension...
Here's is one I built the chassis for:
Big Welcome! Any pics??
What a nice guy!
Good Job Brakes 101 Skootch! Not Bad for a Painter. http://www.hotrodheaven.com/tech/brakes/brakes1_index.htm
Where is Jim Arnold?? He would know! Need some glass work also Jim, please call me.
I agree second Lesson: Repeat steps 1 & 2
This is a drawing or a Wilwood 6 Piston Caliper. http://www.wilwood.com/Products/001-Calipers/010-SL6/dwg.gif You will notice that there is a...
Hello Hotrodav8, Simple change over to disc brakes for your car. Take and masure the inside bearing diameter and outside bearing diameter....
Check with the part store and have him give you the application for the "rebuilt" master cylinder you bought; then have him look up the Wagner...
Here is a link and part of the brake article that might help you. http://www.hotrodheaven.com/tech/brakes/brakes4.htm#formula for master...
Separate names with a comma.
The Jalopy Journal