The Jalopy Journal
Hi I have a friend who is short of a 1928 head . This could be a bare head or with valves and rockers. Has anyone got one they would be willing to...
Morning This is for the English or possibly European side of the pond. I have for sale a selection of Chevrolet bits imported from Australia...
Yep there is a bit of a puddle in the way! If you click your mouse on the red writing in my previous comment it takes you straight to the USA...
Thanks to all. Looking at the guide issue surprisingly there is very little wear on both heads so I think I can get away with 8mm stems Herb...
Bit of help please with Valves I spent an hour last night looking through the pages of this but failed to find a definitive answer. I want a...
So been a bit busy making a few bits The first is a side draft manifold for an SU probably 1 1/8 or 1 1/4" when I trip over one. I made it...
[ Hi All So here is the blank cam follower I have knocked up on the CNC.. Following the initial attempt I decided that it would be better to make...
I have just bought a set of 261 with a + 40 thou oversize from the states. I will need to get a set of rings. Looking at the advice from Herb and...
There are a couple of Chevy engines on prewar car in Denmark if of any interest Looks like a 28 and an earlier engine
Morning All Been doing a bit of wood butchery with my pet chainsaw to make the back and scuttle / dashboard for the speedster I am sorting out at...
[ATTACH] [ATTACH] [ATTACH] So the current thinking might be to make a set of roller rockers . Played about with the lazer cutter and knocked up...
[Thanks Herb I think from the picture I should be able to work it out from here . Am I right in thinking that you have used the VW adjusters on...
Herb Looking through the posts in 1349 you say you made some billet aluminium rockers . Do you happen to have a drawing kicking about . Sort of...
Separate names with a comma.
The Jalopy Journal