The Jalopy Journal
First step is to go check with the machine shop you use or the local go to machine shop and see it they will even line bore it if you pick up used...
59/54 at least Caddy wheels were pretty deep to get those caps to fit and had the special center with clips that held the cap. bolt pattern is 5...
I was figuring that he might see something that was not quite right or have a better way of checking.
Going out on a limb here but a "used MSD" might not be much better or as good as a Known to be worn out Mallory. I used to work for the go to guy...
It might sit too low for your application but my 8BA came with a fan that mounts on it's own bracket below the generator. [IMG] Not the best...
Back in the 70's a lot of guys were doing what Chucky did, Find rubber floor runners that had the pattern you want and most of the time it sells...
I'd say you need for Krylon32 to see the thread and add his input. He is one of the Hamb 32 Ford Chassis gurus.
OK one more time Sid has been pretty well retired for the past couple of years and hasn't taken in work since before he had knee surgery. He...
That looks like pure fun.
I'd take the shock stud out and straighten the one that came on it. You will have to get the big hammer out but it looks like it can be done...
This was the one we did probably 35 years after we built it in the high school autoshop. It had the narrow 56 belt though. The pulley, we dug...
Mechanical or electronic is a bit of damned if I do/damned if I don't because with a mechanical you still have to figure out what you are going to...
Big difference between Required and or Needed for safety reasons and having the pieces on in hope of impressing the mouth breathers. Case in...
From the postage tag on the package it looks like they were shipped from Burlingame CA on a bulk permit. Magazines with advertising are shipped at...
Ah crap you got me going to HF again and I just went and picked up three pair of gloves and some other small items. That angle grinder doesn't...
Separate names with a comma.
The Jalopy Journal