The Jalopy Journal
I annealed about 6" sections where the bends needed to be, then just bent the molding by hand. I had left about 12" extra to use as a lever. One...
I fit a set of early Model A square top u-bolts and cut down upper plate, along with a 32-34 lower plate. First step was to drill the two...
My friend Joe came over today to help on the front crossmember repair. He's done a few, so I let him take the lead. He got right at it, cutting...
Did you miss the pictures of the sectioned car with Ollie's name on the side? [IMG]
I also wanted to finally address the roof insert. I had saved an original tack strip for this car, as the insert was just finished off with this...
The roadster in question was built by Brandon at Eastbay Speed and Custom for Scott Gillen. More pics here...
Hey, every little bit helps! I will put the front spreader bar back in before we start cutting.
I decided it's time to refresh the front end and do some more upgrades. [ATTACH] I had already pulled the bumper, speader bar and apron when I...
how bout them apples... [IMG] https://ahrf.com/historical-library/photo-archives/jeano-lacoste-collection/#!enviragallerytags_laj-30349
All those details stated above, plus the font on the class letters. The G is the same on the A/G and the current C/G. Too coincidental not to be...
and the steering shaft support tied into the master cylinder fittings. A lot of thinking went into these builds [IMG]
That looks great! You can do my 5w next...:cool:
How's this for busy and purposeful... [IMG] [ATTACH]
Here is the engine compartment/firewall in my old 32 closed cab, as built in the 50's. I just rewired it, but left the battery box, horn,...
Separate names with a comma.
The Jalopy Journal