The Jalopy Journal
You can convert a 4L80E to plain old hydraulic operation with a TransGo HD3 kit for about $250 and ditch all the electronic crap. That makes the...
302 headers will work on a 351W, from what I've seen, they will just tuck up higher than they would on a 302. That could be a good thing or a bad...
I'd look into the Scarebird disc brake swap for those cars, I have his old V8 Mustang kit and I'm very impressed, though actually getting a kit...
DHL sucks, it took them almost a week to get my new computer from their depot to my house, and the stupid depot is only 80 miles away. Plus their...
Some good info here, but no one has mentioned greasing the box. FYI, I think this is the same design steering box as 1956+ Fords, the best thing...
That looks like an 80s motor at least, going by the valve covers, they look like 5.0L EFI units. Either way, all 351Ws are 28oz balance. Could be...
Both the 82 6.2l and 84 6.2L trucks and all of our 6.5L trucks we had ran factory vacuum pumps, and honestly, I'm not aware of a 6.2/6.5 without...
$80 was conservative, since he kept bitching about how much it cost. Now that I think about it, It was $20 for paint, about that for primer, and...
You can build a WC T5 to hold well over 500hp in a fairly heavy car with serious traction, just rebuild it with parts from Astro Performance or...
Damn good info, but I'd also fill the steering box with grease before I adjusted it. Makes life easier on the box, easier to drive, takes out a...
Amen. hell, buy a real color, it's about $1 more. IMO saying "all I can afford is flat black" ain't true. Ok, if you want it, cool, paint it flat...
Damn, you're right, I didn't see "NO REGULATOR", I just saw where he mentioned using a remote regulator and ass-u-med-d that he'd do the common &...
It's a Ford 8", they are fairly common. Oddly enough, a LOT of MII's got 3.40:1 posi pigs from the factory. :D FYI its 57.25" flange to flange...
Sounds like it ought to work. Sounds to me like you're wanting to set it up basically like most multi-point EFI setups, with the pressure...
Finally something I know about! :D A guy can't chip in on a hot rod board when he doesn't know shit about older cars. :D If you don't mind...
Separate names with a comma.
The Jalopy Journal