The Jalopy Journal
I also suspect you have the stop/turn lamps wired to the dimmer running lamp side of the bulb so when you flip on the headlamps the brighter...
I don't have any first hand experience with Ed but a friend of mine back in SF has a good story. He was sitting in his 4-door Kaiser that had the...
Info gets leaked from time to time. They have to run and drive, they get judged on the the sound coming from it. How well the design was thought...
Scrub line is the imaginary boundary where if you have a tire failure that nothing on the chassis will touch the ground from the reduced ride...
I didn't want to be the spoiler but now I can say that the firewall color was leaked in the pictures about cleaning up the running board rubber,...
Those wheel cylinders look like they may be leaking. I can't tell if it's just crud build up around them or bubbled up paint from contact with...
https://www.mooneyesusa.com/product-p/mp9600f.htm Personally I would rather run the mesh stainless screens, the ones you want are linked above...
Technical - USE CANDLE WAX TO LOOSEN RUSTED ON BOLTS | The H.A.M.B.
I'm not normally a Chevy guy but that ride touches me in a way that tickles my tighty whiteys. I would be stoked to have it parked in my driveway...
Just read through this thread and glad you are leaving it alone and getting a dedicated hot rod to tool around in. Having driven my old neighbors...
Same, it was quite a gruesome injury that resulted from excessively heated water in order to extract every last bit from the coffee beans. The...
It does look a little worn but still round just off center, the bore in the pedal looks like it might have been done late on a Friday at the Ford...
The sill boards are readily available for under 200 bucks. They have some reliefs cut in them for clearing some bumps on the frame rails. Check...
I have never clipped the fill port cover on any fluid filled gauge, be it automotive or industrial, never seemed to be an issue. Might have to do...
Separate names with a comma.