The Jalopy Journal
This was another ....
just because in many posts from flathead builders i read not more than 85lb pressure.....
Hi all hambers.....i have dubt about my valve spring pressure.....i have a Schneider 400 lift camshaft and they suggest 100 to 110 lb of pressure...
The 4 1/4 stroke needs lot of engine modifies….i have to grind the lower part of cylinders cause the rods interference , going to buy a balanced...
Hi all, so..after lot of visible problem is time to rebuild my 8ba..it has a 3x3/4 crank…..was thinking to buy at stroker kit and bore the engine...
Hi all….so many of us build rods with open drive and '48 banjo and wishbones.Sure i know that many,like me, broken wishbones where they bolt on...
Hi all hambers,i just opened my 8ba flathead and i notice no valve seats, looking on the web i read that the late flathead are without valve...
Time to bore it…change valve seats …..and adjust carburation
Looking on the pistons,i think in half of circle area i can see about 1mm of ring….cylinders are 83mm large...about 3,26inch.....i read on some...
Valves are hollow adjustable with isky springs…..cylinders looks good but, looking in some pistons i can see the upper ring clearly…..
Hi hamber, opened my 8ba flathead that was running very bad, very fast overheating, white smog, oil everywhere, took some pics to show you the...
Separate names with a comma.
The Jalopy Journal