The Jalopy Journal
When was the last time any one saw a pile of these.
Yes it is aluminum and the 062 and 906 are cast iron.
The aluminum head that has the vortec chamber and raised D shape exhaust ports is GM part #10128374. the 062 and 906 do not have D exhaust ports...
Lets start off with the stock type spring you are using dose not have an inner spring it is a dampener.You should use a spring cup that was...
I agree with Jim use a lathe with a collet set up. You can also wrap a piece of shim stock around it all so.
I build a lot of 2 bbl circle track engines that by rule we have to run 1.260 springs stock dia. So there are a lot of springs that will fit you app.
Reading this post is great i,am so bad with it when my wife and i go to the local deli and i,am waiting for the cold cuts i re align all the cans...
Yes very easy to do with HYD.
Yes plug the vac when setting initial.
Heres what go,s in those cans.
Set total timing at 32 degrees as a start.
Pressure washer, soda blaster Will clean then also if you are getting heads back from a shop that has glass beads in the bolt holes find another...
Timing to far retarded gas is burning in the headers.
They just had an open house up by me at Johnsville Naval Air Station in Pa. now closed and turned into a commercial park. Any how the astronauts...
I will give them the benefit of doubt. It is very possible the car may have been junked or put in the yard Short time ago. We don,t know if the...
Separate names with a comma.
The Jalopy Journal