The Jalopy Journal
Thanks Jethro. This makes sense. I could feel the relief cuts through the fuel pump opening. Like a flat spot on the shaft. We shall soldier on...
Thanks Joe, much appreciated!
A friend recently had a 230 rebuilt for his C10. It would not start and we realized it wasn’t pumping fuel. We pulled the pump and realized that...
I checked the battery out and it seems ok. It sits at 12.7 with the car off and doesn't draw down when I turn the headlights on (car off). The...
I’ll check the battery to see what kind of shape its in. Sent from my iPhone using H.A.M.B.
So i have one of those powergen alternators in my 61 Buick. Its always made a whining noise. I finally got around to pulling it out and checking...
My '31. Kinda low to the ground but high on the frame. [IMG] Sent from my iPhone using The H.A.M.B. mobile app
I do have a lathe Mike so i can spin the disc to see if it's unbalanced. Im not sure if a sealed bearing is available. I installed a new bronze...
I checked the clutch adjustment pretty thoroughly throughout this ordeal. I verified that the TO bearing was of the fingers (had about 1 inch of...
A few weeks back my transmission started grinding (mostly on downshifts). It seemed to do it more after 30-60 minutes of driving once everything...
Thanks fellas, I'm going to tear it down and fix it right (and anything else that i find)
The bearing seems good.
Separate names with a comma.
The Jalopy Journal