The Jalopy Journal
My dealings with Gear drive speed & custom were not all that happy. I bought an intake and headers w/ turnouts for a Desoto 276 at the '09 pile-up...
Howdy, I've been lurking and searching the archives for quite awhile now. I used a lot of ideas found here to build a 29' coupester w/ a Buick...
I'd be interested in the Buick drums and parts if you are willing to part with them. I don't know what they would go for... but they are worth at...
I'm flying into Chicago on the 4th from Spokane, Washington this year to make my third Pile-up. Wish I could of taken my Model A, but 1900+ miles...
Well I'm kinda embarassed after 10 months and about 1700 bucks I finally found the source of the god awful noise I've been chasing thanks to d2...
no luck with my 401 rapping noise..this winter hoping it was piston slap I pulled #3 piston and had my builder knurl the piston that added 6 thou....
thanx again for the interest and replies... no dents in the pan. the piston slap or bad wrist pin is about my last hope... I'm not looking forward...
Thanx for the reply. No marks on pistons that would raise concern... but then I chose not to replace them when It was reringed, When the builder...
Well... I pulled the new oil pump today no sign of interference with the crank, so I ground 1/8th off the high spot and doubled the gasket. put...
Had a strange hollow rap that seemed to come from the #1 or #3 cylinder at idle. Sound stopped when I pulled #3 spark plug wire... thought...
Separate names with a comma.
The Jalopy Journal