The Jalopy Journal
Looks great, hope mine turns out that nice!
Probably have to go with, lit it on fire!!......By accident
Nice save! I would build that one!!
Nice!!
Pics of said daughter?
I've run both the 390 and 352 in a 65 f100, I've also run the ford tripower from a 406 in the same truck. My 390 had twice the power and got...
The spot welds are on the inside of that lip of metal inside the cab above the back window. Once you cut your roof off ( above that seam) and...
I cut mine off and welded another on from a doner truck. I cut about 1/2 to 1" above the seam all the way around then drilled out the spot welds,...
Class of 1980 Torrington ct. I had a 66 old 442 455 4spd with a big cam and a 850 holley. Thank god it did'nt have posi or I probably would'nt be...
Yea could be a 351c or 351/400m, they both have the same style heads and valve covers. I've converted a couple propane motors back to gas. The...
Love me some 390's. It takes a little knowledge, but they can be built to run really nice. Awesome torque and even good mpg if done right!
I usually go, it'll probably be pretty small, due to the heatwave we're in. I enjoy it, allways a few bargains.
Question Bubba, I've got a points dist from a 302 ford mercruiser motor. I am wanting to run this in my 5.0 roller cam motor. I've heard these are...
I"ve got a 50 shoebox that I'm building and struggling with the same issue. I'm leaning towards a 305 HO with bigger 1.94/1.60 valves, some monor...
I had a 390 that knocked till it warmed up. I replaced the bearings and had the crack reground and left the pistons alone because it had good...
Separate names with a comma.