The Jalopy Journal
Couple of things you could do, fabricate a longer filler tube that clears and add a vented cap, vent the valve cover, the best solution (but does...
Stipe 340 in a burtz [MEDIA]
Thats the original oil fill location, male sure that oil cap is capable of ventilation, if it it sealed your engine will push oil out of every...
Interestingly the lionspeed heads have a similar shaped combustion chamber with a different plug location, the iron lionspeed 3 ran very well on...
Counterweighted and non counterweight b cranks side by side[ATTACH][ATTACH]
Driving it off the original cam will spin it backwards
I can't remember which, but it is possible to fit an Anglia or prefect distributor to an a engine, might be a bit more readily available in the...
We got the burtz fully dissembled and we discovered the culprit, when we built the engine we used a cast crank gear amd that failed taking out the...
Yes the block did have the oil hole, not sure if it's a billet or cast gear
Between yass and Gundagai
Stipe pump and relief, engine had consistent 40psi, oil pressure was still at 40psi when the engine coughed but after that had zero, turning the...
That would be interesting to see but packaging exhaust on a right hand drive model a is difficult, will update after more disassembly [ATTACH]
Pic of the gear, wouldn't attach to the previous post [ATTACH]
Our trip to Gulgong for the model a 95th birthday was a blast we travelled 537miles at 70 mph most of the way but in my mums burtz powered model a...
7.00x16 5.00x16 Stahl sport radials
Separate names with a comma.
The Jalopy Journal