The Jalopy Journal
I have done this a lot get one of those plastic wheel pattern disk fit it on the pattern you have and mark the pattern you want mark and grill.
57 up center bolt
My old motors manual for a 1953 sez 105 My older manual for 51 didn't not give a number.
With the issues now days of flat cams I think its worth a shot. Got to be cheaper than cleaning up after a flat cam
I see 57 4 barrel intakes on Ebay at the same price as Mummert's catalog
Later blocks seem to have less core shift and the crank case vent in the block is cast over.
What series the pitman arm is the same on a 60, 61, and 62 from 1946-49 75 ser 41-49
Pretty sure it's got a 2gc keep it
have some one rock the steering wheel back and forth and watch the steering components to see if something up stream is moving but the next comp...
Steering stabilizers are usually used in heavy unstrung weight apps IE solid axle 4X4s
I''d of tig welded the holes shut and drilled the 5.5 pattern if that's what's on the back.
If you knurl it used to be done a lot with mixed reviews. But I bought a old hastings machine that came with the original manual. It said only...
This is a Bendix style brake with a floating adjuster . Brake shoes are not anchored with a pin at the bottom...
Arnt these unites Bendix style?
First of all the wheel cylinders should be a always full the valium will change as the piston move. My question are the hoses good a swelling...
Separate names with a comma.
The Jalopy Journal