The Jalopy Journal
Alright! All the learning curves. So, I thought I was being careful and SLOW....the first rear corner turned out great! The second rear corner...
All right, so we got things squared. Had to loosen/ grind out the header Rivets. we got it all squared and to where the doors will hang and...
The photo shows total gap. I could split it but seems much still. I think I need to loosen or drill the header Rives and square things up....
We did add some bracing, maybe not Enough though. At this point, I have cut the lower door and hung the lower half’s To see how things are...
I’m in the process of chopping my model a sedan 4”. I’ve got the back area and the B pillars tacked very well and everything lines up very nicely...
Thanks for the great tips. I will post my progress as I make attempts to make this door functional. What do you guys think..20 gauge or 18?...
I have your basic tools, hammer and dolly set, teardrop hammer, sand bag, bead roller, and wood stump hahah. I most certainly can purchase...
So, How do you shave 10” of the height of a Chevy ls motor? With a 2000 Camaro oil pan and corvette ls6 intake of course!...
Yeah I have a little Miller mig. Well, maybe I will go to the next few swap meets and see what I can find as far as spare parts. Hell, I have...
So it’s been a while since I have posted, but I have been plugging away. I rebuilt a th350 transmission that I have been saving for 10 years...
Hey guys, seeing what your thoughts are on this delicate rust repair. This is the top of my 28 tudor driver side door. Do I fix just the tabs...
So I'm still trying to figure out my wheels and tires but I'm getting my chassis sorted [IMG] Sent from my iPhone using The H.A.M.B. mobile app
So, today I had the time to cut the shock and spring perches off the differential and clean the housing up a bit. I also took the time to go to...
Separate names with a comma.
The Jalopy Journal