The Jalopy Journal
Always leave the adjustment loose on new break in. Always use molly lube on the cam and lifters with break in additive can't be too careful Just...
I'm running a 3:25 gear 31.5 tire 5 speed .86 overdrive With a warmed over flat original motor 29 roadster 60 mph is right around maybe 2200...
[IMG] Sent from my iPhone using Tapatalk
Not a very good pic but it might help[IMG] Sent from my iPhone using Tapatalk
It is stuck in the grove where the original canister would seal on a square cut o ring is Sent from my iPhone using Tapatalk
Drain the coolant out, remove thermostat, fill with water, warm it up and drain again, pick up I believe it's Moroso brand ceramic seal have...
Check with Dave at vintage metalworks he is in Ohio Sent from my iPhone using Tapatalk
Maybe another R valve to the front also, anyway that's what i have on mine, i struggled with mine and kept trying to get all the air out of the...
I used a on off on switch mounted on the steering column just under the timing lever pivot using a one inch piece of copper brake line to slip...
i understand what the manufacture is saying but i don't always follow directions very good, I go with what I know always works for me! it's your...
make sure to let them soak in oil overnight before installing them also clean the roller side out with brake clean or something equal before...
Talk with the guys at Speedway auto parts They have info in there web site Sent from my iPhone using Tapatalk
Call this guy 2317205939 He’s in Michigan I know he just picked up a nice set of doors if he hasn’t sold them yet Never hurts to call He’s a good...
Take the carb back apart and with carb cleaner and air pressure make sure every orifice is clear kind of sounds like the accelerator pump cam is...
Separate names with a comma.
The Jalopy Journal