The Jalopy Journal
If you get to the tires I run p225/75/16 on mine and like the way they soak up the road
I have a 47 dodge truck. I understand the 86 trans from the s10 is the right length but the tailshaft is long and requires some frame mods. The...
Scooter: The shim stack of 4 measures .200 at the flat of the shim and at the raised crush surfaces(1 to the intake and 1 to the head flange)is...
Tad the motor and block are 1956 truck - Block is stamped VT549 Heads are 1733463. I purchased it dissassembled but as one lot. It is all 1956 354...
Here are the pictures [ATTACH] Intake installed with gap showing [ATTACH] What appears to be a NOS gasket set made for this motor...
I have a truck hemi with truck heads that I purchsed as a basket a few years back. I picked up an edmunds intake with the stat in the manifold to...
Water from the extra gasket holes makes sense. I appreciate everyones help. I'll gets some dowels and put the heads on.
Yes the top corner is a dowel but these other 2 spots 1 between the head bolt and pushrod hole and 1 directly above the lower corner head bolt...
Separate names with a comma.
The Jalopy Journal