The Jalopy Journal
Why no prices on classified and why can’t I reply? Sent from my iPad using H.A.M.B.
What am I missing here I m trying to get the tranny off a Model A engine sitting on the garage floor. I took out two bolts from the trans. Into...
Get something out of the wrecking yard with a decent V8 of some kind for as cheap as you can and use that car and all its parts to build your A....
Just some asides not necessary for a closed shaft, a large pipe cutter works way better than trying to cut straight with a hack saw and make...
How can one 1inch bar from the pumpkin to the chassis be stronger that two radius rods with one inch bars in the center. This whole contraption...
No contest if you are going to drive it. SBC
I had that fall off in the center lane of the 5 Fwy around LAX about 55 mph one evening. Luckily there was so much grease around the nut it didn't...
I was always taught to go for the thinest ring that went all the way around. A multi angle grind which is even better will provide a very small...
Copper fuel lines work fine if you have flex line from frame to engine. my problem is with Lowes. Buy auto parts from an auto parts store nothing...
I thought the powerglide models were 235s
Used for overloads mostly. Pep Boys mustof sold millions
i don t know about Coker but usually white walls are a layer of white rubber under the finish layer of black rubber that is left black for black...
I had a 55 Olds and a 57 Chevy both done there at different times in the 60's. All newtuck and roll black naugahide, even said U.S. Naugahyde on...
Separate names with a comma.