time to let some of my gauge collection go. these are extras of sets i have made up. these were sitting on the shelf awhile, so some are a little dirty from sitting other wise in good shape unless noted other wise. these i have not been tested, i don't have the time to test them all individually some are NOS. i will ship anywhere in the lower 48 states for a flate rate of $5.00. shoot me a pm with any questions. if you are interested in everything i will cut you a good deal. thanks 1) 2 1/16'' stewart warner white tail small logo oil pressure and air pressure gauge. both mech these are date coded '64. this is a pair of NOS gauges. $70 SOLD 2) 3 3/8" stewart warner 3500 rpm mech tach with cable. works, spins freely. chrome is decent gl*** decent. not sure date code(hard too see) $50 SOLD 3) 2 1/16" NOS SW small logo block style water temp, fuel level, clutch pressure, batt gen volt gauges. water temp still in box, other boxes were to far gone to save. will include a NOS temp sender for the water temp gauge. for the 4 gauges and temp sender. (note all gauges and sender are nos except the batt gen volts gauge but it goes with this set) $100 4) NOS SW 6k tach 997AA date code A7 have box a little beat up but there. nice shape. 3 3/8'' electric. $65 SOLD 5) 2 1/16'' SW white needle small logo gauges. all electric water temp, fuel level and oil pressure. in nice shape except the water and oil both have a small ding in the chrome bezel. i have a NOS temp sender i will include for the water gauge. $75 6) 2 1/16" sun gauges. water temp, oil pressure, amp gauge. amp gauge has a indent on chrome bezel other wise decent shape. $60 7) 3 3/8'' sun greenline 10k 8 cylinder tach. comes with chrome cup and column mount bracket. chrome on cup and tach is decent, small scratching from what looks like being polished over the years. $75 SOLD 8) Stewart warner 5k tach. for 8 cylinder 960BE M11. nice shape, different than the usual ones. electric. $55 SOLD 9) SW speedo. looks like a stage 2 style face. mech, spins free. decent shape $30 10) 2 1/16" nieoff vacuum gauge.nice shape. $30 SOLD 11) no name 2 1/16'' 4 hole cast aluminum gauge panel. not pitted but dirty. some elbow grease and it would probably shine up nice( i was going to use this with the small logo block style gauges) $30 12) finned aluminum cover. for tach or oil filer? was on the 6k tach in the box when i got it. has two small holes drilled in the end to hold a tach. 3.75 long 3.5 I.D. $30 SOLD
Btt... More pics of small logo batt gen gauge and clutch pressure gauge.. Posted using the Full Custom H.A.M.B. App!
The Jalopy Journal
