im selling my 27 ford 2dr sedan project. this car was pretty close to being finished before i took the body back off. the body is currently off the car. rolling ch***is with drive-train is together. the ch***is is together but would need to be gone over before road worthy ( needs some nuts, bolts, things need tightening etc). car comes with an old California ***le, body has no tags on it. this project pretty much comes with everything to finish the car. i currently only have one picture at the moment of what the car looked like all together. will take more pics soon as soon as i can get to my storage garage. listed below is everything included in the sale and description. Body: 1927 ford 2 dr sedan. chopped 5". sub rails removed and replaced with 1x1 tubing. body sits on frame at a 2"-3.5" rake back to front to give it the nice stance without having to z the front frame. no floor in body. both doors have been had full outter skins replaced and inners were done with half skin replacements from macs. doors are bare, no latches, regulators, or windows. body was chopped 5''. will need some finishing up as far as metal work goes. all chop welding is complete though. comes with windshield that has been chopped and new gl*** installed. body will need some lower patch panels, rough all around bottom 1"-5". 27 dash with stewart warner gauge cluster ( some work some dont). body isnt perfect but with a little more time and elbow grease it could be. Ch***is: frame is 2X3 tubing. a 12" kick up in the back. leaf over in rear and in front. 57 chevy rear end with 3.55 gear ( non posi) new rear shocks. ladder bar set up. front axle is 46-48 ford drilled, s bones. front custom leaf spring made to run leaf over axle. suicide from end set up. aluminum racing radiator ( no radiator cap need to run inline cap), AA grill shell. chopped down, slides over frame rails. frame is narrow in the front. all brakes new. front drums are have been redrilled to chevy BP 5 x 4.75. car sits on 14" chrome reverse wheels ( NOT SMOOTHIES) fire stone tires. tires are a few years old but thread is great. brake lines ran from rear to proportioning valve with brake sensor. 67 mustang gear box. side cowl style steering set up.steering needs finishing. no driveshaft. Drive train: '61 poly 318 with 727. need converter. have custom made lake style headers made from 30's tourqe tubes. was told motor was rebuilt when i bought it, is clean last time i had it apart. new oil pan gasket and timing cover gaskets. the car currently has a factory 2x4 (fresh professional rebuilt carter wcfb's never ran) set up with original air cleaners in which is not included in the sale for $4500. i will sell it though with car for an additional cost $800. i will put a 2bbl intake on motor if not interested in 2x4 set up. extra parts included: set of nice original 48 chevy tail light ***emblies lens, bezels, guts. (not repops). a set of nice guide headlights with turn signals no bulbs. (not repops) 10 gallon full tank brand new from speedway. brand new 12 circuit wiring harness. brand new floor shifter. im sure i have many other parts as well i cant think of off the top of my head. this is what the car looked like together. i will get more pics as soon as i can. pm me with any questions. great start for a nice early 60's hot rod just needs some love and some one to finish it. im pretty firm at my asking price of $4500 but the less i take the less that will be included in sale. you could put a few more bucks into this car and a month worth of work and be driving her.
Btt... Motor has everything it needs to run! New dizzy with electric ignition with module, New mini starter, new water pump, new gaskets, lake style headers, remote oil location kit.
Last bump as it sits. Ill be getting it running and driving soon, price will go up once the car is running, wired and driving.
The Jalopy Journal
