What subframe will fit International Trucks

Do any of you know what subframe will fit under 50-51 International L series Trucks? My buddy has one from a 78 Camaro for free if I can use it. I also thought it would make fitting the smallblock in my truck easier since the Camaro had a 305. Tried to get him to take some measurements but the loser can't read a tape measure. Hoping someone here had done this!!!!!

BTW, some nice hotrods and ratrods at the Chicago World of Wheels. Nice to see cars that get driven.

Pat

 

S10 clip may work as well.

 

those trucks are probly wide enuf that the Camaro clip will work just fine. By the way these can be very nice lookin old trucks.

 

I'm going to try and get to his house to measure it, thanks for the reponses.

 

Plynch, I have a 56 S series that I believe is similar to yours. The track width on it measured approx 61" from drum to drum. According to the info I've found the camaro is 61 and a half wide. I have since put a mustang II on mine it was slightly narrow but looks nice with a slightly deeper offset wheel. Sure am glad to see another old binder out there. Good luck. Pool

 

A Camaro clip will work fine, but it is too wide at the wheels........A friend of mine did that swap and only had to cut/ shorten the upper and lower control arms........he's been driving that truck for more than 20 years now