Register now to get rid of these ads!

1952-59 Ford 1954 Crestline bumpers

Discussion in 'Off Topic Hot Rods & Customs' started by oledad, Mar 1, 2015.

  1. oledad
    Joined: Jul 21, 2009
    Posts: 14

    oledad
    Member

    I read on an old post that 1952 and 1953 bumpers will interchange, but not the 1954. Is this correct? I have access to a 1953 Customline with both bumpers usable. Will either or both fit my 1954? Thanks in advance, Steve
     
  2. carnut341
    Joined: Oct 20, 2008
    Posts: 151

    carnut341
    Member

    The 54 front bumper is different than 52-3.
     
  3. carnut341
    Joined: Oct 20, 2008
    Posts: 151

    carnut341
    Member

    The bumpers will fit. They have a little different design. I usedrear guards from a 54 station wagon on the rear of my 53 because they were shorter and gave it more of a custom look.
     
  4. JeffB2
    Joined: Dec 18, 2006
    Posts: 9,665

    JeffB2
    Member
    from Phoenix,AZ

    52-54 rears are the same, A '54 Front will take some real fabrication as the front splash pan has a different contour and the brackets are not the same, if you could get the brackets and splash pan it would be easier to fab up.
     
  5. oledad
    Joined: Jul 21, 2009
    Posts: 14

    oledad
    Member

    Thanks for the info guys. I bought the whole car (1953 2 door sedan) for parts. It had been in a barn since 1972 according to the license plate, but due to squirrels, wet leaves, etc. it's basically toast! Most of the trim (including hood ornament) is salvageable as are the dash and bumpers. Seats are there but very rough. Gl*** is all there but I have all the gl*** for my 1954 hardtop. I plan to sandblast the bumpers and paint them body color anyway so the pitted chrome is not a big deal. I'm learning as I go. Thanks again! I'm sure I'll be back with more questions soon. Steve
     
  6. JeffB2
    Joined: Dec 18, 2006
    Posts: 9,665

    JeffB2
    Member
    from Phoenix,AZ

  7. HOTRODPRIMER
    Joined: Jan 3, 2003
    Posts: 64,735

    HOTRODPRIMER
    ALLIANCE MEMBER

    I found out the hard way they are different but the 52/53 will work on a 54 but you will have to use the 52/53 front splash apron. HRP
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.