Register now to get rid of these ads!

TECH: Johnny1290's Po-Boys Shoebox Ford Builder's Guide

Discussion in 'The Hokey Ass Message Board' started by Johnny1290, Sep 24, 2008.

  1. F91
    Joined: Dec 29, 2012
    Posts: 126

    F91
    Member

    Greatest thread ever!
     
    geemann51 likes this.
  2. Zapato
    Joined: Mar 5, 2001
    Posts: 2,195

    Zapato
    Member Emeritus

    Been told that the springs are built for both by St. Louis Springs in St.Louis
     
  3. Zapato
    Joined: Mar 5, 2001
    Posts: 2,195

    Zapato
    Member Emeritus

    Couple other things that worked for me.

    When I installed a Maverick rearend the shocks that were on the car were old rusty monroes. I had a set of never used KYB gas-a-just shocks on the shelf originally meant for a 74 LUV pickup rear mount. Went right on no problem. No part number but it can be sourced from a KYB catalog.

    I have no idea what my driveshaft is from but since the rear u-joint was sloppy (even after greasing) found that a spare one for my 70 Bronco fit just fine.
     
  4. coleminer
    Joined: Mar 30, 2008
    Posts: 86

    coleminer
    Member
    from East Texas

    Lost a little interest every time the SBC was mentioned. The revised version for the basket case build was less about the engine type. After all, it is a Ford.
     
    Jeff Hornbeck likes this.
  5. manyolcars
    Joined: Mar 30, 2001
    Posts: 9,579

    manyolcars

    12 volt electric fuel pumps for your Ford are $65 at Shoeboxcentral and $79 at Dennis Carpenter but only $14 on ebay.
    E8016S 12V Universal Low Pressure Electric Fuel Pump
     
    geemann51 likes this.
  6. gearheadwelder
    Joined: Jan 17, 2009
    Posts: 100

    gearheadwelder
    Member
    from CT.

    Great stuff here, thanks for keeping it going.
     
  7. 50fish
    Joined: Aug 27, 2007
    Posts: 157

    50fish
    Member

    Great stuff! Wish I’d seen all this info before I started my 50. Thanks.
     
  8. vanherrb
    Joined: Nov 23, 2010
    Posts: 47

    vanherrb
    Member

    bump it for new shoebox guys
     
  9. Fat47
    Joined: Nov 10, 2007
    Posts: 1,578

    Fat47
    Member

    While I'm 3/4's done with my build this thread is great. Hope a new generation of shoebox builders find the time to contribute.
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.