**I currently have this on a trailer so can deliver if you have a forklift and aren't too far. Lathe is in North Torrance.** Serial number traces to 1940. Great shape, I got it about 4 years ago, owner before was old timer who had it in his garage since 1959 and sadly passed on. (I got it from a used machinery place) 5' between centers, whole thing is pretty big, like 8.5' long hole through spindle 1.625" bearings great condition only thing I did was some (not all) new felts, and take apart and free up clutch for power feed, and replace the flat belt 4 jaw, 3 jaw, faceplate motor is 220 single phase: GE 1.5 HP Model 5KCS204XB10B comes with assorted tooling (see pic) (including a new albrecht (MT3) drill chuck!) could use some new v-belts on the primary drive and one could change the style of plug / plug wiring if they really wanted... (everything works safe / fine those are the only things I can think of that one might not be happy with)
The Jalopy Journal
